The Mini-Clik is an accurate rain gauge and can be verified by setting up a “tube” type rain gauge in the same vicinity and making periodic readings. C. Is the rainfall actually hitting the Mini-Clik? Check for obstructions to rainfall such as overhangs, trees or walls. All Mini-Clik models are listed by Underwriters Laboratories, Inc. (UL). Wireless Rain-Clik Components Wireless Receiver 1. Bypass Button: Allows automatic or manual watering when the sensor is active. 2. Receiver Status LED: Used to indicate the status of the sensor. 3. Receiver Bypass LED: Indicates when sensor has been bypassed. 4. Radio Antenna: Receives a wireless signal from theFile Size: 1MB. Wiring to the Hunter ICC The Mini-Clik connects directly to the ICC. This allows you to easily override the sensor by using the Sensor switch on the front panel. 1. Remove the jumper from the two “SEN” terminals. 2. Route the wires from the rain sensor up through the same conduit opening used for valve wiring. 3. Connect one wire to the.
www.doorway.ru Easily install a wired Hunter Mini-Clik rain sensor to any brand of irrigation controller or timer. This is a very easy proces. Toro Super Rotor Service Manual Toro Super Rotor aka (K - Rain Pro Plus) Manual Rain Sensor Manuals / Wireless Hard Wired Hunter Mini Clik Rain Sensor Our Standard Hard Wired Type Hunter Rain Clik Rain Sensor Wireless Type Hunter Solar Sync Sensor Irritol RS Rain Sensor Our Standard Wireless Type. Older Irrigation Controllers No. With a Rachio (Gen 1, 2 or 3) a rain sensor is a "belts and suspenders" approach to catch the situation where there is no precipitation forecast, but it does rain before or during a scheduled run. 1 Like. Galette J, am #5. @DLane, the rain sensor was green before I replaced my old hunter controller.
Wireless Rain-Clik Components Wireless Receiver 1. Bypass Button: Allows automatic or manual watering when the sensor is active. 2. Receiver Status LED: Used to indicate the status of the sensor. 3. Receiver Bypass LED: Indicates when sensor has been bypassed. 4. Radio Antenna: Receives a wireless signal from the. MINI CLIK HV Rain Sensor for high voltage application /20 VAC SR ISTAD TIS Specify Separately Model Description SGM Optional utter Mount SG MC Stainless Steel Sensor uard Enclosure for Mini-Clik eaF tures • Easily installs on any automatic irrigation system • Debris tolerant for reliable operation and no unnecessary shutdowns • Can be set to shut system off from to 1 of rainfall • Includes 25 of 20 AW sheathed, two-conductor, UL-approved wire • ®Optional user-installed metal. The Mini-Clik is an accurate rain gauge and can be verified by setting up a “tube” type rain gauge in the same vicinity and making periodic readings. C. Is the rainfall actually hitting the Mini-Clik? Check for obstructions to rainfall such as overhangs, trees or walls. All Mini-Clik models are listed by Underwriters Laboratories, Inc. (UL).
0コメント